Wisman MEA series is a high-stability precision high-voltage power supply module with AC power supply, air insulation, MEA series module power supply provides positive or negative high-voltage output, strong anti-ignition ability, low starting and adjusting voltage, low ripple, fast response speed, suitable for accelerator, ion beam and other applications. MEA series module power supply can be internal and external precision measurement and control, MEA series module power supply protection has overvoltage, overcurrent, arc, safety interlock and so on. The MEA series delivers exceptional performance and value for a wide range of demanding applications.

Characteristics:

1. Input voltage 105Vac~125Vac  or 210Vac~250Vac.

2. Output voltage 30kVmax, output power 15W.

3. Low output ripple and noise less than 0.05%p-p.

4. High stability 0.01% per hour.

5. Low temperature coefficient 25ppm/℃.

6. Strong arc protection and short circuit protection.

7. External potentionmeter or external control voltage programming.

8. Air isolation, the mimum storage is 200mJ.

9. Postive or Negative output.

10. OEM customization. 

Typical application:

Ion beam, Accelerator, Electrostatic oiler,Nanoknife, Material withstanding voltage test(high voltage resistor withstanding voltage test, high voltage capacitor stand voltage test, insulation material withstanding voltage test), Electrostatic filed establishment, plastic screening, plastic sorting, capacitor charging, high voltage flashover, Agricultural breeding, Electrostatic eliminating, Air purification, Industrial application and Scientific research.  

Specification:

Input voltage:105Vac-125Vac or210Vac-250Vac，48HZ-63HZ single phase,Max current 0.25A, 400HZ allowance

Output voltage range：1kV、3kV、5kV、10kV、15kV、20kV、30kV

Output power: 15W

Voltage control:

Local: Controlled by internal voltage (0 V to +30 V) or through internal multiple-turn potentiometer setting.

Remote control:external 0 to 10V control signal can adjust the output from 0V to the highest output voltage.
Remote: Internal the power supply: The local multi-turn potentiometer can set the current from 0A to the highest current.
External remote control: External 0 to 10V control signal can set the current from 0A to the highest current.

Line regulation :
Relative load: 0.01% (no load to rated load)
Relative input: ±0.01% (input voltage change is ±10%)
Current regulation:
Relative load: 0.01% (no load to rated load)
Relative input: ±0.01% (input voltage change ±10%).

Ripple voltage: Under the premise of output rated voltage, the peak value of the ripple voltage is 0.05% of the highest output voltage. Lower ripple can be customized.

Stability:0.01%per hour after 30 mins’ warm up, 0.05% every eight hours.

Temperature coefficient:less than 25ppm

Working temperature:0 to 50℃

Storage temperature:-40 to 85℃

Temperature：20%~85% RH,non-condensing

Voltage/current monitor:0 to 10V, accruacy is 1% under the rated outout.

Dimension:

3kV-15kV:292*133mm*83mm

20kV-30kV:349*133mm*83mm

Cooling:

convection cooled

Connector:

High-voltage output connector: The recessed insulating conduit and the high-voltage cable protruding in are connected by a metal connector. The total length of the high-voltage cable is 1 meter.

Input and output connector: DB15 terminal connector, including control and display signals.

For more details, please click the PDF button to download the PDF file for viewing...

For information concerning our high voltage products, please call at 086-029-33693480 or visit our website www.wsmhv.com

Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. The application fields of Wisman products cover medical, industrial, semiconductor, safety, environment, analytical instruments, scientific research and other fields. You can purchase a variety of specifications in one-stop high-voltage power supplies from Wisman. We have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.

Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.