欧美xxxxx视频在线,人人澡人人爽人人添

Why pour silicone grease into the high voltage cable jack?

The working environment of high voltage power supply is very complex, some areas are wet, some places are dry,

and some places are rainy. In wet and rainy areas, it often causes high-voltage cable jacks to discharge and spark.

The main reason is that the high pressure has adsorption effect on dust and other particles and the high voltage

cable and the high voltage cable jack is not 0 tolerance, there is always a gap between them, in the course of years

of work, the high voltage cable jack does not use silicone grease, it will lead to dust adsorption in the high voltage

jack. Moisture after dust adsorption will reduce the high voltage insulation, which will make the high voltage from

the high voltage cable jack to the metal housing, generating a spark. After ignition, it will damage the high-

voltage power supply, high-voltage cable and the load of high-voltage power supply, causing some unnecessary

heavy losses. Therefore, the high voltage cable jack must be filled with silicone grease.

High pressure silicone injection method:

Squeeze the high voltage silicone grease directly into the jack of the high voltage cable (if both ends of the high

voltage cable are inserted into the high voltage cable jack, each high voltage cable jack needs to be injected with

silicone grease in this way). Because the gap between the high voltage cable and the high voltage jack is large,

it is necessary to squeeze some silicone grease into the high voltage jack, and then insert the high voltage cable

into the high voltage jack. To determine the amount of silicone grease, observe whether the silicone grease

overflows into the high voltage cable jack after the high voltage cable is inserted. If the silicone grease is not

seen at the high voltage cable jack after the high voltage cable is inserted, it indicates that the amount of

silicone grease injected into the high voltage cable jack is too small. If the high voltage cable is inserted

outside the high voltage jack, too much silicone grease is injected into the high voltage jack.

Will this method make the high voltage cable metal head contact bad?

No. This is the design of the plug socket to ensure that the contact is not affected.

How much silicone grease is appropriate to inject?

The standard is: the cable is inserted into the silicone grease just to the high voltage jack, does not overflow is

suitable, overflow paper to wipe off the excess.

WSM169 High voltage insulating silicone grease

High voltage insulating silicone grease, developed by Dr. kama of High voltage power supply electrochemistry at Wisman, is an insulating sealing arc extinguishing silicone grease specially used in the field of high voltage power supply.

Applications: High voltage power supply, X-ray tube, high voltage cable connector, high voltage electrical connector, electrical connection components.

Main functions: prevent corona release, eliminate arc, insulation, anti-creepage, lubrication, moisture-proof, sealing.

Performance characteristics:

Excellent electrical insulation and chemical stability, high flash point, low freezing point;

Wide temperature operating range, the consistency changes with temperature very little and never solidifies;

Excellent lubricity and sealing, compatible with most plastics and rubber;

Excellent water resistance, weather aging resistance, weak acid and alkali resistance, very long service life.

Usage: The product is directly coated on the surface of the device.

Setting:

Operating temperature: -50~200℃.

Storage temperature: -40~85℃.

Weight: 100G

WSM168 High voltage insulating silicone grease

High voltage insulating silicone grease, developed by Dr. kama of High voltage power Chemistry at Wisman, is an insulating sealing arc extinguishing silicone grease specially used in the field of high voltage power supplies.