High voltage amplifier AMF10R600, output voltage ±10kV, output current ±60mA DC,Output peak current ±300mA up to 20us，Wisman High Voltage Power Supplies offers high voltage power amplifiers for industrial and research applications.All solid state high voltage insulation design, can achieve high conversion rate, broadband and low noise operation.Four-quadrant active output absorbs or outputs current to a reactive or resistive load over the entire output voltage range.This type of high voltage amplifier output from Wisman High Voltage Power Supply is essential for achieving accurate output response and the high conversion rates required for a variety of loads.Examples include high capacitive or reactive loads.

Product Features:

Four-quadrant output for driving capacitive loads

Closed-loop system achieves high precision

Short-circuit protection for device protection

All-solid-state design, maintenance-free operation

Dc stable programmable power supply applications

Low output noise for highly accurate output.

Typical applications:

Dielectric elastomer,Soft robot, HASEL Actuator (Artificial muscle), Electroactive Polymer ,Ionic conducting polymer gel film,Pneumatic artificial muscle, Electroviscous Fluid, Magnetorheological Fluid, Ferroelectric tester, Piezoelectric Drive and Control, Laser modulation, Semconductor research, electrostatic deflection, Electrorheological fluid, AC or DC bias, Particle Accelerators, Mass Spectrometers, Material characterization, Ferroelectric, Atmospheric plasma, Dielectric barrier Discharge, Dielectric Barrier,Dielectric barrier discharge , DBD plasma actuator, Atmospheric pressure plasma, Corona discharge, Electrostatic suspension furnace , Electrostatic haptic display, Water tree, Dielectric breakdown testing, Ion beam deflection, Electron beam deflection, Electrophoresis, Dielectrophoresis , Flash sintering, Material polarization, Ion engine, Particle accelerator, Material characterization, Electrostatic actuator, Electrostatic spinning, Electrostatic spraying, Electrostatic coating, Solar panel (photovoltaic cell) testing, Langmuir probe, Electro-optical modulation Manufacturing, Electrophotography, Corona generator, Scorotron grid consumables, Main charging roller (PCR), Developing roller, Corona charging supplies, Sensitive drum charging, Electrostatic suction cup, Electrostatic deflection of charged particle beam, 3D printing (application of electro-hydraulic power (EHD) technology), etc.

Feature description:

Input voltage: 220AC±10%

Input current: 10A

Output voltage: 0 ~±10kv DC or AC peak

Output current: 0 ~±60 mA DC or AC peak ±300mA maximum 20us

Input voltage range: 0 to ±10 V DC or peak AC

Input impedance :25kΩ in phase proportional amplification (50kΩ reversed phase proportional amplification or differential amplification)

Dc voltage gain: 1000V /V

Dc voltage gain accuracy: better than 0.1% of full scale

Dc offset voltage: less than ±4V

Output noise: less than 1.5V rms

Conversion rate: greater than 1000 V /μs(generally 10% to 90%)

Large signal bandwidth :DC to greater than 10khz(2% distortion)

Small signal bandwidth (-3 db): DC to greater than 20kHz(1% distortion)

Stability: less than 50ppm /hr, non-cumulative

Temperature coefficient: below 25ppm /°C

Operating temperature: 0°C to 40°C(32°F to 104°F)

Working humidity: relative humidity 85%, no condensation

Highest elevation: 2,000 m (6,561.68 ft) above sea level

Overall dimensions: 1040 mm H x 430 mm W x 870mm D(41 "H x 17" W x 34 "D)

Weight: 70kg

Voltage display

Display ratio: 1000:1

Dc accuracy is better than 0.1% of the full range

Dc offset voltage is less than ±5 mV

The output noise is less than 20mv RMS

Output impedance 47Ω

Current display

Display ratio: 1 V /6 mA

The DC accuracy is greater than 0.5% of full scale

Offset voltage is less than ±10 mV

The output noise is less than 30mv

Output impedance 47Ω

PD07016

For information concerning our high voltage products, please call at 086 029 89282015  or visit our website: www.wsmhv.com

Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. You can purchase multiple varieties and specifications in one-stop from us. We have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.

Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.